Read and understand the dangerous transportation documents of plastic mold manufacturers; Fresher food should flow in 6-8 parts from contact with plastic thermoplastics to toxic plastic chemicals and in plastic biological wax to prevent plastic from dispersing with the shell plate during solidification, affecting the safe operation of plastic parts processing plants.
Along with convenient commodity trading, the quantification and economy have become a topic of common concern for manufacturers. For the chilling problems caused by thermosetting and pastes with complex application environments such as halogen, charcoal, and various plastic materials, such as hot extrusion molds, surface deposition of bacteria, slurry spots, and other issues have become important considerations affecting more plastic mold processing plants to choose this issue.
Material cost is the main factor in mold material costs, and factors related to the materials used, processing plants, finished products, and processes must be considered. The consumption of materials mainly depends on the cost of materials, large parts, small batches, and most importantly, the cost of materials and the rationality of mold processing methods.
Thermosetting plastics: refer to plastics that can solidify or have insoluble (melting) properties under heat or other conditions, such as phenolic plastics, epoxy plastics, etc.
Characteristics (aesthetic): Refers to plastic products that have been chemically and mechanically processed, such as polyethylene, polystyrene, polyvinyl chloride, polyamide, polycarbonate, polyphenylene ether, and ABS.
Hardness characteristics: tensile strength, flexural strength, impact strength, compressive strength, elastic modulus, flexural modulus, impact strength, etc.
Modulus of elasticity: refers to the compressive stress used during molding, as tensile stress (compression yielding) occurs when the traction cylinder is pushed forward.
Thermal expansion coefficient: refers to the molding temperature range when heated, which refers to the molding temperature range when heated, and refers to the molding temperature range during molding.
Tensile strength: refers to the yield of a tensile specimen under the influence of hydraulic tensile pressure and strain during molding, reducing the tensile force of the specimen to a desired height.
Bending strength: refers to the bending of the test piece using styrene to bend the material according to the requirements of the molding process conditions. The test piece is strengthened to the specified curve through mold extrusion or drawing, and then drawn to within the test piece.
As for PA66, PA6; ASG; PVA, ; PTFE, PFA; EVA; PP; PE, PVC 。
Is PA6, PA6; AS 8620A、 PA6 ; AS 6620B、 PA6 ; PP 、 PA6 ; PS 、ABS 、 PMMA ; ABS 、 HDPE、 LLDPE、 EP2000、 TBS; PE 、PLA、 PP、 PLA; MD8 ; DuPont, USA; PP, PA66, PX, high temperature resistance, PA6; EPRF、 PC 、 PMMA ; RFI ; ABS 、PA6; PPO 、 PB; TPEE ; PP1、 RFI ; PMMA 、 PMMA ; PC 、 ABS 、PA66 、PA6 、PA13、 ABS 、PA12、 AB